Price List for
Individual Components of G7-Series Two-Component PU Adhesive Product Lineup for Hair Products

Key Advantages

  • Superior Bonding Strength & Durability: Designed for factories and professional repair workshops where strong, long-lasting adhesion is essential to minimizing hair shedding.

  • Ultra-High Viscosity: Exceptionally thick, highly concentrated adhesive components (even thicker than honey), allowing dilution with approximately 2 to 5 parts of compatible solvent per 1 part of combined adhesive components, depending on the application.

  • Customizable Bonding Performance: Resin-to-hardener mixing ratios and solvent dilution ratios can be adjusted through practical testing to suit different hair fibers (human hair, PVC-based synthetic fibers, or heat-resistant synthetic fibers), V-looped hair applications, thin or thick hair wefts, and netting materials with different mesh opening sizes (e.g., 0.3 mm or 2 mm).

System Specifications

  • Components: Component A (PU Base Resin) and Component B (Hardener / Curing Agent).

  • Mixing Ratio: Resin-to-hardener ratios generally range from 1:1 to 6:1, depending on the formulation and application requirements.

  • Application: We provide initial technical guidance on mixing, solvent selection, and dilution, enabling customers to conduct their own tests and optimize adhesive performance for their specific manufacturing processes.

Highly Cost-Effective for International Buyers

  • Lower Shipping Costs & Potential Import Duty Savings: By importing concentrated adhesive components rather than ready-to-use diluted adhesives, customers can reduce international freight costs and potentially lower import duties. For example, shipping 5 kg of concentrated components instead of 25 kg of pre-diluted adhesive avoids transporting an additional 20 kg of solvent.

  • Economical Local Solvent Purchasing: Customers can purchase the specified compatible solvent locally instead of paying international shipping charges, processing costs, and additional supplier profit margins on imported, pre-diluted adhesives.

  • Lower Cost per Use: High dilution ratios can significantly reduce the cost of prepared adhesive solutions, making these systems particularly economical for factories and professional workshops.

  
 
 
   
   
 
 

All glues listed below are two-component liquid adhesive systems, commonly referred to as 2-component glues.
Both components must be mixed before use.

  1. 1 liter ≈ 0.9–1.0 kg, depending on the specific gravity of each adhesive.

  2. All prices below do not include shipping costs.

  • Viscosity (density) and hardness/softness can be adjusted by changing the mixing ratio.

  • Drying time may vary depending on the mixing ratio of the two components (X & Y or A & B).

📦 Minimum Order Quantity

Minimum package: 1 liter (1 kg) per component (e.g., G7100: 1 kg + G7400: 1 kg)

Most customers typically order 1 kg of Component X and 2 kg of Component Y
(total: 3 kg), as Component X is generally used in a higher mixing ratio than Component Y in standard applications.
Meanwhile, for a trial order kit, 05 Kgs(X) and 1 Kg(Y) are avaiable.

🧪 Solvent Information

Solvents can usually be purchased locally in your country
(e.g., via eBay in the USA).

  • The solvent price is approximately USD 3.00/kg, depending on order quantity, country, and supplier.

⚠️ Technical Support Policy

If specific mixing ratios are required for your application,
we will provide recommended mixing ratios and suitable solvents for our chemicals.

However, we do not provide production, application, or treatment methods
using our chemicals.

This is because proper use involves pre-treatment and post-treatment processes,
and it is not feasible to provide complete technical guidance
to customers purchasing adhesives only.

Please note that professional training and manufacturing know-how
are offered separately as paid services, as part of our technical training programs.

G7100-TIH & G7400-TIH-10T
(G7100-Tape-in Hair & G7400-Tape-in-Hair-10T)
2-component adhesive system
For making Tape-in Hair Extensions and Skin Wefts by liquid coating followed by drying
Price-1-EMS
(1 LT PACK)

US$80.00/Liter FOB/Seoul, Korea in case an order is for 1 Liter or 1 kg per component glue; or 1 kg is to be packed in a bottle even when an order os for 10 Liters.
- Available shipping way : by EMS or by Sea Mail Parcel
(It takes about 3 or 5 days by EMS from us to your location, but 2 months by Sea Mail Parcel.)
Price-2-EMS
(2 LT PACK)

US$50.00/Liter FOB/Seoul, Korea in case an order is for 2 Liters, and we pack 2 Liters in a bottle
- Available shipping way : by EMS or by Sea Mail Parcel
(It takes about 3 or 5 days by EMS, but 2 months by Sea Mail Parcel.)
Price-3-EMS
(5 LT PACK)

US$40.00/Liter FOB/Seoul, Korea in case an order is for 5 Liters, and we pack 5 Liters in a bottle
- Available shipping way : by EMS or by Sea Mail Parcel
(It takes about 3 or 5 days by EMS, but 2 months by Sea Mail Parcel.)
Price-4-EMS
(10 LT PACK)

US$35.00/Liter FOB/Seoul, Korea in case an order is for 10 Liters ~ 90 Kgs, and we pack 10 Liters in a bottle
- Available shipping way : by EMS or by Sea Mail Parcel
(It takes about 3 or 5 days by EMS, but 2 months by Sea Mail Parcel.)
Price-5-SEA

US$25.00/Kg FOB/Seoul, Korea (100 Kgs~999 Kgs /order, 18, 20, 30 Kgs per can or durm)
- For large quantity order, we go by Kg, instead of Liter.
- Available shipping way : by Sea Cargo)
- Available shipping way : by Sea Cargo
- Extra handling charges ( US$500.00 in case of 100 Kg order) mainly including Wooden Case Packing Cost (US$200.00) required by shipping lines for safety, Carriage (US$100.00) froum our company to (Busan) Sea Port in Korea, and other Charges (US$200.00) billed by a forwarding company (for B/L issuing, Terminal Handling Charge, ENS Chrage, Handling Charge, etc) will be added per shipment.
- Ocean freight (& Insurance) : US$250.00/CBM (for Spain, India)

Meanwhile, the above extra handling charges can be much less in case the consignee is in Qingdao, China and when we know your quantity.

CW7011: CW7044: SOL = 10: 40: 200

       

FAQ

Q. Are these one-part or two-part adhesives?
A. All products are two-component liquid adhesives and must be mixed before use.

Q. Can I adjust hardness or drying time?
A. Yes. Both viscosity and drying time can be adjusted by changing the mixing ratio.

Q. What is the minimum order quantity?
A. Minimum order is 1 kg per component.

Q. Do you provide application methods?
A. We provide mixing ratios and solvent recommendations only.
Application and production methods are offered separately
as part of paid training and technical programs.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
       

 

G7100-INJ & G7400-INJ

2-component adhesive system
for V-looped hair, single knotted hair by hand; or injected hair by hair implanting(sewing) machine or hand-held injection machine on PU skin

Compared to one-component sprays, this system offers incomparably superior bonding strength and durability. It is the preferred choice for factories and professional repair shops to completely eliminate hair sh
ding.
1-4-S4(20) + Warm Drying
G7011-WF-TL & G7044-WF-TL

2-component adhesive system
for hairs wefted with a weft sewing machine
1-4(5)-TL4(20+) + Air Drying
JK-Knot sealer G7100-KS1 & G7410T-KS4
2-component adhesive system
for hairs knotted (tied) on lace(net,mesh)
(denser grade type of CW715-Knot-Green &Yellow)

Compared to one-component sprays, this system offers incomparably superior bonding strength and durability. It is the preferred choice for factories and professional repair shops to completely eliminate hair shedding.

1-4-S3(15) <Bas> (1-2/3-TL(6/7)<LJH> + Air Drying
G7100-MH1 & G7430-MH3

 2-component adhesive system
- Used in making nets, meshes shaped (formed) with in head contour shape> 1-3-T10(40) <Bas-M>
G7100-SK1(4) & G7410T-SK4

2-component adhesive system
 - Used in making hairs implanted by machine into PU skin sheet or PU skin cap in head contour shape> 1-4-T4(20)
G7100-SK1(5) & G7420T-SK5
2-component adhesive system
 - Used in making hairs implanted by machine into PU skin sheet or PU skin cap in head contour shape> 1-5-T4(24) <Hot Weather> <Bas>
G7100-NFR & G7450NFR

2-component adhesive system
- Used in giving anti-fraying to lace or net of Lace frontals, Full Lace wigs when they are cut
G7100-STR & G7450STR

2-component adhesive system
- Used in making HD lace, very thin or weak lace strengthened
G7000-WG-A2 & G7000-WG-B9T )

 2-component adhesive system
- Used in making wefts (denser grade type of CW7400-WG (Blue & Red))> 1-5-S4(24) <Hot Weather>
G7011-STH & G7044-STH


2-component adhesive system

(Old product codes:G7011-TH & G7044-TH / G7011-S & G7044-TH)
- Used in making Tape-In-Hair Extensions(gluing method)


1-4-S4(20)
The below product codes are for our old and regular customers.
G7011 & G7044, CW7011 & CW7044), G7100-N & G7400-N 

[2-component adhesive system
G7101-KS1 & G7104-KS4 ( old item code, CW7101-KS & CW7104-KS )
[2-component adhesive systeme]
G7000-KS-G7000-KSB-10T (or we can say G700-KS-A & G700-KS-B10T )
[2-component adhesive system]
<(Knot Sealer (denser grade type of CW715-Knot-Green & CW715-Knot-Yellow))>
G7000-SK ( A & B-20T )

[2-component adhesive system]
<Used in making hairs implanted by machine into PU skin sheet or PU skin cap in shead shape		  
   
(2)850+    
Copyright© JohnKorea Co® · All Rights Reserved – Seoul, Korea